Skip to main content

Roof leak or storm damage? Schedule yours

Free Roofing Tool

Roof Pitch Calculator

Enter the rise and run to get your roof's pitch, angle and slope. Add the house size to get roof area, roofing squares and shingle bundles.

Calculator

1. Roof pitch

Measure how many inches the roof rises over 12 inches of level run.

Pitch
6/12
Angle
26.6°
Slope
50%
Area multiplier
1.118

2. Roof area and shingles

Roof area
1,860 sq ft
With waste
2,046 sq ft
Roofing squares
20.5
Shingle bundles
62

Bundles assume 3 bundles per square, which is standard for architectural shingles. An estimate for planning, not a material order.

Want exact numbers for your roof?

Our 60-second estimate measures your roof from satellite imagery and gives you a price range. No ladder, no sales call required.

(704) 605-6047

How to Calculate Roof Pitch

Roof pitch is the number of inches a roof rises for every 12 inches of horizontal run. A roof that rises 6 inches over 12 inches of run has a 6/12 pitch, which is a 26.6 degree angle. To find roof area, multiply the footprint of the house (with overhangs) by the pitch multiplier in the chart below.

  1. Place a level against the roof surface, or against the underside of a rafter in the attic.
  2. Hold it level and mark 12 inches from the end that touches the roof.
  3. Measure straight down from the 12 inch mark to the roof. That measurement is the rise.
  4. Write the pitch as rise/12. Four inches of rise is a 4/12 pitch.

Formulas: angle = arctan(rise ÷ run). Slope percent = rise ÷ run × 100. Pitch multiplier = √(rise² + 12²) ÷ 12. Roof area = footprint × multiplier.

Roof Pitch Chart: Angle and Area Multiplier

Roof pitch converted to degrees, slope percent and area multiplier
PitchAngleSlopeMultiplierRoof area on a 1,500 sq ft footprint
1/124.8°8%1.0031,505 sq ft
2/129.5°17%1.0141,521 sq ft
3/1214.0°25%1.0311,546 sq ft
4/1218.4°33%1.0541,581 sq ft
5/1222.6°42%1.0831,625 sq ft
6/1226.6°50%1.1181,677 sq ft
7/1230.3°58%1.1581,737 sq ft
8/1233.7°67%1.2021,803 sq ft
9/1236.9°75%1.2501,875 sq ft
10/1239.8°83%1.3021,953 sq ft
12/1245.0°100%1.4142,121 sq ft
14/1249.4°117%1.5372,305 sq ft
16/1253.1°133%1.6672,500 sq ft
18/1256.3°150%1.8032,704 sq ft

What Your Pitch Means for a New Roof

  • Below 2/12 (flat or low slope): shingles are not allowed by code. These roofs use a membrane such as TPO, EPDM or modified bitumen. See flat roof repair.
  • 2/12 to 4/12: asphalt shingles are allowed with double underlayment (IRC R905.2.2). Many owners choose standing seam metal here because it sheds water better at low slopes.
  • 4/12 to 9/12: the standard range. Every common material works, and crews can walk the roof.
  • Above 9/12 (steep): the roof has more surface area for the same house, and the crew needs roof jacks and harness anchors. Labor takes longer, so steep roofs cost more per square.

Pitch and area are the two biggest inputs to a roof price. For current price ranges, read the 2026 roofing cost guide.

Scheduling Now

Skip the Math. Get a Measured Estimate.

We measure pitch, area and squares for you and send a written price. Free for homeowners in the Charlotte and Lake Norman area.

No pressure. No obligation. Just honest advice from a family-owned business.

FAQ

Roof Pitch FAQ

Quick answers on pitch, area and shingle counts.

Roof pitch is rise over run. Hold a level flat against the roof or a rafter, mark 12 inches along the level, and measure straight down from that mark to the roof. That number of inches is the rise, so 6 inches means a 6/12 pitch. To turn pitch into an angle, take the inverse tangent of rise divided by run: a 6/12 pitch is about 26.6 degrees.
Multiply the length and width of the house footprint, including the roof overhang, then multiply by the pitch multiplier for your roof. A 50 by 30 foot house with 1 foot overhangs is 52 x 32 = 1,664 square feet of footprint. At a 6/12 pitch the multiplier is 1.118, so the roof is about 1,860 square feet.
A roofing square is 100 square feet of roof. Roofers price and order materials by the square, so a 2,000 square foot roof is 20 squares. Architectural shingles are usually packed 3 bundles to a square.
Divide your roof area by 100 to get squares, add 10 to 15 percent for waste, then multiply by 3 bundles per square. A 1,860 square foot roof with 10 percent waste is about 20.5 squares, or 62 bundles. Starter strip, ridge caps and hip caps are ordered separately.
Most homes in the United States have a pitch between 4/12 and 9/12. Pitches of 3/12 and below are low slope, and pitches above 9/12 are considered steep and usually cost more to roof because the crew needs extra safety equipment and works more slowly.
Under the International Residential Code (R905.2.2), asphalt shingles need a slope of at least 2/12. Between 2/12 and 4/12 the code requires double underlayment. Below 2/12 a roof needs a low-slope system such as TPO, EPDM or modified bitumen. Always check the shingle maker’s installation instructions for the product you are using.
A 4/12 roof pitch is 18.4 degrees. Other common conversions: 5/12 is 22.6 degrees, 6/12 is 26.6 degrees, 8/12 is 33.7 degrees, 10/12 is 39.8 degrees and 12/12 is 45 degrees.
Yes. In the attic, hold a level against the underside of a rafter and measure the drop over 12 inches. From the ground you can also sight the gable end with a pitch gauge or a phone level app. For a replacement quote, a roofer measures pitch and area from satellite imagery and confirms them on site.